Quality Lining Company, Inc. - SURE GRIP

Click our logo to return to our homepage.
SURE GRIP - SHEET DESIGN VALUES

SHEET DESIGN VALUES

"Use this reference as a guide only. The information is believed to be reliable, but no guarantee is made nor do we assume liability in connection with its use."

PROPERTY
TESTING

METHOD
STANDARD VALUES

UNIT     HDPE     PP-R     PVDE

Density DIN 53479
(ASTM D792-86)     g/cm³    0.945     0.898      1.78

MFI (Melt Flow Index) DIN 53735
(ASTM D1238-88)                       g/10 min   0.7-1.0      0.5        3-5
                                      (190/5)   (190/5) (230/5)

Heat Reversion
(Dimensional Stability) DIN 16726
(ASTM D1637-83)                             %          <2            <2         <1

Yield Stress DIN 53455
(ASTM D638-89)                        N/mm²      >16          >20        >50
                                      >2,320     >2,900   >7,250

Elongation of Yield Test Bar
(ASTM D638-89)                            %          >12           >10       >8

Elongation at Break v=50 mm/mm
(ASTM D638-89)                            %         >200          >50       >50

Fire Classification DIN 4102/part 1
UL-94                                           B2            B2         B1
                                          V2            V2        V-0

Electric Conductivity                                       10 13th    10 13th   10 13th
                                       power      power     power

Resistance to pull-out SKZ test directives                          t/m²         30            30           30
                         t/ft²           3              3             3

Maximum Working
Temperature                           ^oC           60            90          130
                          ^oF          140          194         266

Note: DIN is the European equivalent of ASTM Standards.

4153-B Highway 231
Lacey's Spring, AL 35754

Send us email toqlining@qlining.com

Voice (256) 498-0007
Fax (256) 498-0074

Created by

PROPERTY	TESTING METHOD	STANDARD VALUES UNIT HDPE PP-R PVDE
Density	DIN 53479 (ASTM D792-86)	g/cm³ 0.945 0.898 1.78
MFI (Melt Flow Index)	DIN 53735 (ASTM D1238-88)	g/10 min 0.7-1.0 0.5 3-5 (190/5) (190/5) (230/5)
Heat Reversion (Dimensional Stability)	DIN 16726 (ASTM D1637-83)	% <2 <2 <1
Yield Stress	DIN 53455 (ASTM D638-89)	N/mm² >16 >20 >50 >2,320 >2,900 >7,250
Elongation of Yield	Test Bar (ASTM D638-89)	% >12 >10 >8
Elongation at Break	v=50 mm/mm (ASTM D638-89)	% >200 >50 >50
Fire Classification	DIN 4102/part 1 UL-94	B2 B2 B1 V2 V2 V-0
Electric Conductivity		10 13th 10 13th 10 13th power power power
Resistance to pull-out	SKZ test directives	t/m² 30 30 30 t/ft² 3 3 3
Maximum Working Temperature		^oC 60 90 130 ^oF 140 194 266