Quality Lining Company, Inc. - AGRU / AMERICA, INC.

Click on our logo to return to the homepage.
AGRU / AMERICA, INC.	COMPANY MISSION Increasing awareness, and concern for protection of our natural resources, creates a demand for engineered products and specialized services to install specific environment protective systems. Quality Lining Company will offer the product knowledge, and latest production / installation procedure, to meet our customers environmental challenge.

HIGH DENSITY POLYETHYLENE SMOOTH SHEET

Product Data (Minimum Average Roll Values)

Property
Test Method
Values

Thickness (mils nominal) ASTM D751 30       40     60      80     100

Melt Flow Index (g/10 minutes) ASTM D1238 - E .40     .40    .40     .40     .40

Density (g/cm³ min) ASTM D792 or D1506 .940 .940 .940   .940   .940

Tensile Strength at Yield (lbs/in width) ASTM D638 (Modified) 66       88     132    176   220

Tensile Strength at Break (lbs/in width) Type IV Specimen 120    160    240    320   400

Elongation at Yield (%) Gauge length 2 in. break, 13       13      13      13     13

Elongation at Break (%) 1.3 in. yield, 2 ipm 500    700    700    700   700

Tear Resistance (lbs.) ASTM D1004 - Die C 20       30      45      60     72

Low Temperature Impact (^oF max) ASTM D746 -103 -103 -103 -103 -103

Dimensional Stability (% change max) ASTM D1204, 1 hr @ 212^oF 2^o        2^o      2^o      2^o     2^o

Environmental Stress Crack (hrs) ASTM D1693 1500 1500 1500 1500 1500

Puncture Resistance (lbs.) FTMS 101 - C, Method 2065 36       52     80    105   130

Carbon Black Content (%) ASTM D1603 2-3     2-3    2-3    2-3    2-3

Carbon Black Dispersion ASTM D5546 1,2      1,2    1,2     1,2     1,2

4153-B Highway 231
Lacey's Spring, AL 35754

Send us email to qlining@qlining.com

Voice (256) 498-0007
Fax (256) 498-0073

Created by

Property	Test Method	Values
Thickness (mils nominal)	ASTM D751	30 40 60 80 100
Melt Flow Index (g/10 minutes)	ASTM D1238 - E	.40 .40 .40 .40 .40
Density (g/cm³ min)	ASTM D792 or D1506	.940 .940 .940 .940 .940
Tensile Strength at Yield (lbs/in width)	ASTM D638 (Modified)	66 88 132 176 220
Tensile Strength at Break (lbs/in width)	Type IV Specimen	120 160 240 320 400
Elongation at Yield (%)	Gauge length 2 in. break,	13 13 13 13 13
Elongation at Break (%)	1.3 in. yield, 2 ipm	500 700 700 700 700
Tear Resistance (lbs.)	ASTM D1004 - Die C	20 30 45 60 72
Low Temperature Impact (^oF max)	ASTM D746	-103 -103 -103 -103 -103
Dimensional Stability (% change max)	ASTM D1204, 1 hr @ 212^oF	2^o 2^o 2^o 2^o 2^o
Environmental Stress Crack (hrs)	ASTM D1693	1500 1500 1500 1500 1500
Puncture Resistance (lbs.)	FTMS 101 - C, Method 2065	36 52 80 105 130
Carbon Black Content (%)	ASTM D1603	2-3 2-3 2-3 2-3 2-3
Carbon Black Dispersion	ASTM D5546	1,2 1,2 1,2 1,2 1,2